The OPAL Discussion Forum

[Huiwen Koay <koay AT rcnp.osaka-u.ac.jp>]

Dear all,

Hi, is there any recommendtion to access to Ippl.h library from the binary package of OPAL so that I can adapt the ascii2h5part.cpp?

Thanks again for your precious time.

Best regards,

Huiwen

On Wed, Jul 10, 2019 at 11:54 AM Huiwen Koay <koay AT rcnp.osaka-u.ac.jp> wrote:

Dear Achim,

Thank you for your reply.

I checked through the link you gave. It could be a solution.

However, as I am using binary package currently, I do not had have Ippl.h in the directory (or it is hidden in some directories which I don't know?)

Do you have any suggestion to obtain this ?

Thanks again.

 

Best regards,

Huiwen

On Mon, Jul 8, 2019 at 10:55 PM Gsell Achim (PSI) <achim.gsell AT psi.ch> wrote:

> On 8 Jul 2019, at 10:57, Huiwen Koay <koay AT rcnp.osaka-u.ac.jp> wrote:
>
> Dear Jochem and Matthias,
>
> I finally managed get the estimated bunch size. Thanks for your help.
> Anyway, I am still looking for methods to convert Efield input from ascii to h5part.
> Do you have any suggestions?

Unfortunately we don’t have a general purpose program for this. But you can adapt

https://gitlab.psi.ch/OPAL/src/blob/master/tools/BandRF/ascii2h5block_asgic.cpp

from the OPAL sources to your needs.

Best

Achim


>
> Thanks again.
>
> Best regards,
> Huiwen
>
>
> On Wed, Jun 26, 2019 at 10:29 PM Snuverink Jochem (PSI) <jochem.snuverink AT psi.ch> wrote:
> As Matthias pointed out to me, it should be:
>
> y - longitudinal
>
> Best regards,
> Jochem
>
>> On 26 Jun 2019, at 15:19, Snuverink Jochem (PSI) <jochem.snuverink AT psi.ch> wrote:
>>
>> Dear Huiwen,
>>
>> Matthias and I can reproduce your finding.
>> The local frame (OPTION, PSDUMPFRAME=bunch_mean) in the stat file is always:
>>
>> x - horizontal
>> y - radial
>> z - vertical
>>
>> I suppose your radial momentum (PRINIT attribute of the CYCLOTRON) is not 0?
>>
>> In that case the local frame is rotated with respect to the initial gaussian input distribution, so RMSx (in the rotated local frame) will no longer be 0.
>>
>> Best regards,
>> Jochem
>>
>>> On 26 Jun 2019, at 04:16, Huiwen Koay <koay AT rcnp.osaka-u.ac.jp> wrote:
>>>
>>> Dear Matthias,
>>>
>>> Thank you for your prompt response.
>>> In your reply, RMSx = sqrt( <x^2> - <x>^2 ). So if I set the initial sigmax=0, I should have the initial RMSx=0.
>>> However, it is not so. As long as sigmay is not zero, RMSx will not be zero.
>>> It seems to me that
>>>
>>> RMSx = sqrt( <x^2> - <x>^2 ) + f(y)
>>>
>>> I am quite confused by this. Hope that you can help in clarifying this matter.
>>>
>>>
>>>
>>> Best regards,
>>> Huiwen
>>>
>>>
>>> On Wed, Jun 26, 2019 at 3:01 AM Frey Matthias (PSI) <matthias.frey AT psi.ch> wrote:
>>>
>>>
>>> Dear Huiwen,
>>>
>>> Regarding RMSx and RMSy. In OPAL-cycl, x is horizontal and y is longitudinal direction. Sure, when you change sigmax of the initial
>>> distribution you can have a different RMSy due to transversal-longitudinal couplings.
>>>
>>> RMS is the root-mean square, e.g. in x-direction it is computed by
>>>
>>> RMSx = sqrt( <x^2> - <x>^2 )
>>>
>>> where <x> is the centroid and <x^2> the second order moment.
>>>
>>>
>>> Best,
>>> Matthias
>>>
>>>
>>> Von: opal-request AT lists.psi.ch [opal-request AT lists.psi.ch]" im Auftrag von "Snuverink Jochem (PSI) [jochem.snuverink AT psi.ch]
>>> Gesendet: Dienstag, 25. Juni 2019 17:00
>>> An: Huiwen Koay
>>> Cc: opal
>>> Betreff: Re: [Opal] Questions regarding .stat output and rfmap input
>>>
>>> Dear Huiwen,
>>>
>>> Concerning questions about OPAL, it is best to use the email list as more users and members of the developer's team will see your message, and you'll get a quicker response.
>>>
>>> 1) @Matthias, can you answer that question perhaps?
>>>
>>> 2) I agree there is no reference in the Manual to the h5part format. That should be added and thanks for pointing that out. There is some information here: https://gitlab.psi.ch/H5hut/src/wikis/home
>>>
>>> @Achim, can you point Huiwen to how he can convert his ASCII field map to a h5part file?
>>>
>>> Best regards,
>>> Jochem
>>>
>>>> On 25 Jun 2019, at 15:41, Huiwen Koay <koay AT rcnp.osaka-u.ac.jp> wrote:
>>>>
>>>> Dear Jochem Snuverink,
>>>>
>>>> Hi. I have previously sent email to inquire about OPAL input for B fieldmap. Currently I managed to simulate the single particle tracking using opal-cycl. However, when I move onto deeper calculations, such as bunch calculation and central region calculations, I face some troubles. I did send inquiries to some of the members in the mailing lists directly but I receive no reply. Thus, I would like to ask for help again here. I sincerely appreciate if anyone could help in clearing my confusion.
>>>>
>>>> 1) In manual 2.1, the coordinate system of .stat output in opal-t is given. From my interpretation, the local frame in .stat file is similar to that defined in opal-cycl. However, when I changed sigmax in distribution input of type=GAUSS, both RMSx and RMSy changed. The RMSx and RMSy in .stat file seems not to be consistent with the X and Y defined in local frame of opal-cycl. So, in that case, I would like to know the definition of RMSx and RMSy given in the .stat file.
>>>>
>>>> 2) I would like to use an eletric field map in OPAL for central region calculations. However, in type=BANDRF, the input format for rfmap is in .h5part. Regarding this, I would like to ask if you had any reference format of .h5part file so that I can translate my ascii field map to H5part?
>>>>
>>>> Thank you very much for your help.
>>>> I am looking forward to your soon reply.
>>>>
>>>>
>>>>
>>>> Best regards,
>>>> Huiwen
>>>
>>
>