================== Test 1 =====================
Verify that the differents Modes of the RPS give correct Outputs on the
RPS module, @ Tue Jul 14 04:48:25 CEST 2015 by FS85
1. set RPS mode for beamline bis BMA1: mode to "2,IQCOM,$BMA1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
2. set RPS mode for beamline bis BME1: mode to "2,IQCOM,$BME1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
3. set RPS mode for beamline bis BMC1: mode to "2,IQCOM,$BMC1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
4. set RPS mode for beamline Gantry 1: mode to "2,IQCOM,$GNT1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x00CC
Interlocks outputs (5-8) of J102003 have the value 0xC000
5. set RPS mode for beamline Gantry 2: mode to "2,IQCOM,$GNT2,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x00CC
6. set RPS mode for beamline Optis: mode to "2,IQCOM,$OPT,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0xC00C
Interlocks outputs (5-8) of J102003 have the value 0x0C00
7. set RPS mode for beamline bis BMD1: mode to "2,IQCOM,$BMD1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
8. set RPS mode for beamline Experiment: mode to "2,IQCOM,PIF,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x0C0C
Interlocks outputs (5-8) of J102003 have the value 0x0CC0
9. set RPS mode for beamline Gantry 3: mode to "2,IQCOM,$GNT3,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x0C0C
--- but are not as expected
Test 1 has not been successfull, Repeat, Fix or inform ZPT
================== Test 2 =====================
Verify that for different modes, the RPS behaves correctly
when scanning AMA1 @ Tue Jul 14 04:48:25 CEST 2015 by FS85
set RPS mode for beamline Gantry 1: mode to "2,IQCOM,$GNT1,1,DIA"
for AMA1<1000 inputs and outputs of module J102025 not as expected 0x1DDD 0xC0CC
Test 2 has not been successfull, Repeat, Fix or inform ZPT
================== Test 5 =====================
Test Interlock generation of diagnostic modules
@ Tue Jul 14 04:48:25 CEST 2015 by FS85
master on RPS module J102025
read RPS module input J102025:REG:R:7
generate pulse on module XMA1118
read RPS module input J102025:REG:R:7
Pulse gave the expected value of 0x10DD
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1119
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1116
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1115
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1117
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J112009
read RPS module input J112009:REG:R:6
generate pulse on module XME1310
read RPS module input J112009:REG:R:6
Pulse gave the expected value of 0xD0DD
master on RPS module J112023
read RPS module input J112023:REG:R:4
generate pulse on module XME1311
read RPS module input J112023:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J112023
read RPS module input J112023:REG:R:5
generate pulse on module XME1410
read RPS module input J112023:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J112023
read RPS module input J112023:REG:R:5
generate pulse on module XME1411
read RPS module input J112023:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J101030
read RPS module input J101030:REG:R:5
generate pulse on module XMA0310
read RPS module input J101030:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J101030
read RPS module input J101030:REG:R:5
generate pulse on module XMA0311
read RPS module input J101030:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J101046
read RPS module input J101046:REG:R:7
generate pulse on module XMA0410
read RPS module input J101046:REG:R:7
Pulse gave the expected value of 0x10D0
master on RPS module J124081
read RPS module input J124081:REG:R:5
generate pulse on module XMD0710
read RPS module input J124081:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J124081
read RPS module input J124081:REG:R:5
generate pulse on module XMD0711
read RPS module input J124081:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J124086
read RPS module input J124086:REG:R:5
Module J124086:REG:R:5 with value 0x0001 is not correct
Test 5 has not been successfull, Repeat, Fix or inform ZPT |