Skip to Content.
Sympa Menu

proscan-opinfo-elog - [[Proscan-opinfo-elog] ] ELOG Proscan: Problem Kontrollsysteme: RPS Test fail!

proscan-opinfo-elog AT lists.psi.ch

Subject: Proscan-opinfo-elog mailing list

List archive

[[Proscan-opinfo-elog] ] ELOG Proscan: Problem Kontrollsysteme: RPS Test fail!


Chronological Thread 
  • From: Boccioli Marco <Marco.Boccioli AT psi.ch>
  • To: <proscan-opinfo-elog AT lists.psi.ch>, "Koenig Stefan (KS07)" <stefan.koenig AT psi.ch>, "Chowdhuri Zema (CZ32)" <zema.chowdhuri AT psi.ch>, "van der Meer Robert (VR17)" <robert.vandermeer AT psi.ch>, "Brinkmann Martin (BA85)" <martin.brinkmann AT psi.ch>, "Veghini Dario Attilio (VD17)" <Dario.Veghini AT psi.ch>
  • Subject: [[Proscan-opinfo-elog] ] ELOG Proscan: Problem Kontrollsysteme: RPS Test fail!
  • Date: Mon, 28 Aug 2017 13:51:10 +0200

Title: ELOG
Eintrag   Sat 26-Aug-17 08:25, Barchetti, Foiera, Probst, Problem, anderer, Kontrollsysteme, "RPS Test fail!" 
    Antworten   Mon 28-Aug-17 13:50, Boccioli Marco (BX84), Problem, anderer, Kontrollsysteme, "RPS Test fail!" 
Ein neuer ELOG Eintrag wurde eingegeben:
Logbuch: Proscan  Eintrag-ID: 28300    Eingabezeit: Mon 28-Aug-17 13:50     Als Antwort auf: 28285
Wann:Sat 26-Aug-17 08:25 
Autor: Boccioli Marco (BX84) 
Eintrag: Problem 
System: Kontrollsysteme 
Effekt: anderer 
Titel: RPS Test fail! 

The new version of the RPS Tests was not yet deployed. It will be ready for tomorrows (Tuesday morning) routine test.

 

Barchetti, Foiera, Probst schrieb:

BALL Status: full Mastership
however, every single test fails

================== Test 1 =====================

Verify that the differents Modes of the RPS give correct Outputs on the
RPS module, @ Sat Aug 26 08:23:02 CEST 2017 by FS85

1. set RPS mode for beamline bis BMA1: mode to "2,IQCOM,$BMA1,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x000C
   Interlocks outputs (5-8) of J102003 have the value 0x0000

2. set RPS mode for beamline bis BME1: mode to "2,IQCOM,$BME1,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x000C
   Interlocks outputs (5-8) of J102003 have the value 0x0000

3. set RPS mode for beamline bis BMC1: mode to "2,IQCOM,$BMC1,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x000C
   Interlocks outputs (5-8) of J102003 have the value 0x0000

4. set RPS mode for beamline Gantry 1: mode to "2,IQCOM,$GNT1,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x00CC
   Interlocks outputs (5-8) of J102003 have the value 0xC000

5. set RPS mode for beamline Gantry 2: mode to "2,IQCOM,$GNT2,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x000C
   Interlocks outputs (5-8) of J102003 have the value 0x00CC

6. set RPS mode for beamline Optis: mode to "2,IQCOM,$OPT,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0xC00C
   Interlocks outputs (5-8) of J102003 have the value 0x0C00

7. set RPS mode for beamline bis BMD1: mode to "2,IQCOM,$BMD1,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x000C
   Interlocks outputs (5-8) of J102003 have the value 0x0000

8. set RPS mode for beamline Experiment: mode to "2,IQCOM,PIF,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x0C0C
   Interlocks outputs (5-8) of J102003 have the value 0x0CC0

9. set RPS mode for beamline Gantry 3: mode to "2,IQCOM,$GNT3,1,DIA"
   Interlocks outputs (1-4) of J102003 have the value 0x0C0C
     --- but are not as expected

Test 1 has not been successfull, Repeat, Fix or inform ZPT

 ================== Test 2 =====================

Verify that for different modes, the RPS behaves correctly
when scanning AMA1   @ Sat Aug 26 08:23:02 CEST 2017 by FS85

set RPS mode for beamline Gantry 1: mode to "2,IQCOM,$GNT1,1,DIA"

for AMA1<1000 inputs and outputs of module J102025 not as expected 0x1DDD 0xC0CC

Test 2 has not been successfull, Repeat, Fix or inform ZPT

 ================== Test 5 =====================

Test Interlock generation of diagnostic modules
   @ Sat Aug 26 08:23:02 CEST 2017 by FS85

   master on RPS module J102025
   read RPS module input J102025:REG:R:7
   generate pulse on module XMA1118
   read RPS module input J102025:REG:R:7
   Pulse gave the expected value of  0x10DD

   master on RPS module J102007
   read RPS module input J102007:REG:R:4
   generate pulse on module XMA1119
   read RPS module input J102007:REG:R:4
   Pulse gave the expected value of  0xDDDD

   master on RPS module J102007
   read RPS module input J102007:REG:R:4
   generate pulse on module XMA1116
   read RPS module input J102007:REG:R:4
   Pulse gave the expected value of  0xDDDD

   master on RPS module J102007
   read RPS module input J102007:REG:R:4
   generate pulse on module XMA1115
   read RPS module input J102007:REG:R:4
   Pulse gave the expected value of  0xDDDD

   master on RPS module J102007
   read RPS module input J102007:REG:R:4
   generate pulse on module XMA1117
   read RPS module input J102007:REG:R:4
   Pulse gave the expected value of  0xDDDD

   master on RPS module J112009
   read RPS module input J112009:REG:R:6
   generate pulse on module XME1310
   read RPS module input J112009:REG:R:6
   Pulse gave the expected value of  0xD0DD

   master on RPS module J112023
   read RPS module input J112023:REG:R:4
   generate pulse on module XME1311
   read RPS module input J112023:REG:R:4
   Pulse gave the expected value of  0xDDDD

   master on RPS module J112023
   read RPS module input J112023:REG:R:5
   generate pulse on module XME1410
   read RPS module input J112023:REG:R:5
   Pulse gave the expected value of  0xDDDD

   master on RPS module J112023
   read RPS module input J112023:REG:R:5
   generate pulse on module XME1411
   read RPS module input J112023:REG:R:5
   Pulse gave the expected value of  0xDDDD

   master on RPS module J101030
   read RPS module input J101030:REG:R:5
   generate pulse on module XMA0310
   read RPS module input J101030:REG:R:5
   Pulse gave the expected value of  0xDDDD

   master on RPS module J101030
   read RPS module input J101030:REG:R:5
   generate pulse on module XMA0311
   read RPS module input J101030:REG:R:5
   Pulse gave the expected value of  0xDDDD

   master on RPS module J101046
   read RPS module input J101046:REG:R:7
   generate pulse on module XMA0410
   read RPS module input J101046:REG:R:7
   Pulse gave the expected value of  0x10D0

   master on RPS module J124081
   read RPS module input J124081:REG:R:5
   generate pulse on module XMD0710
   read RPS module input J124081:REG:R:5
   Pulse gave the expected value of  0xDDDD

   master on RPS module J124081
   read RPS module input J124081:REG:R:5
   generate pulse on module XMD0711
   read RPS module input J124081:REG:R:5
   Pulse gave the expected value of  0xDDDD

   master on RPS module J124086
   read RPS module input J124086:REG:R:5
   Module J124086:REG:R:5 with value 0x000D is not correct

Test 5 has not been successfull, Repeat, Fix or inform ZPT

 

ELOG V3.1.3-aded4ae



Archive powered by MHonArc 2.6.19.

Top of Page