================== Test 1 =====================
Verify that the differents Modes of the RPS give correct Outputs on the
RPS module, @ Tue Nov 14 05:40:33 CET 2017 by Schicht3
1. set RPS mode for beamline bis BMA1: mode to "2,IQCOM,$BMA1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
2. set RPS mode for beamline bis BME1: mode to "2,IQCOM,$BME1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
3. set RPS mode for beamline bis BMC1: mode to "2,IQCOM,$BMC1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
4. set RPS mode for beamline Gantry 1: mode to "2,IQCOM,$GNT1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x00CC
Interlocks outputs (5-8) of J102003 have the value 0xC000
5. set RPS mode for beamline Gantry 2: mode to "2,IQCOM,$GNT2,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x00CC
6. set RPS mode for beamline Optis: mode to "2,IQCOM,$OPT,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0xC00C
Interlocks outputs (5-8) of J102003 have the value 0x0C00
7. set RPS mode for beamline bis BMD1: mode to "2,IQCOM,$BMD1,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x000C
Interlocks outputs (5-8) of J102003 have the value 0x0000
8. set RPS mode for beamline Experiment: mode to "2,IQCOM,PIF,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x0C0C
Interlocks outputs (5-8) of J102003 have the value 0x0CC0
9. set RPS mode for beamline Gantry 3: mode to "2,IQCOM,$GNT3,1,DIA"
Interlocks outputs (1-4) of J102003 have the value 0x0C0C
Interlocks outputs (5-8) of J102003 have the value 0x0CC0
================== Test was successfull =====================
================== Test 2 =====================
Verify that for different modes, the RPS behaves correctly
when scanning AMA1 @ Tue Nov 14 05:40:33 CET 2017 by Schicht3
set RPS mode for beamline Gantry 2: mode to "2,IQCOM,$GNT2,1,DIA"
for AMA1<1000 inputs and outputs of module J102025 as expected: inputs = 0x1DDD, outputs = 0x0CC0
set RPS mode for beamline Gantry 1: mode to "2,IQCOM,$GNT1,1,DIA"
Start scan with AMA1
for AMA1<1000 inputs and outputs of module J102025 as expected 0x1DDD 0xC0CC
Test 2 has not been successfull, Repeat, Fix or inform ZPT
================== Test 3 =====================
procedure AMA3 not implemented @ Tue Nov 14 05:40:33 CET 2017
================== Test 4 =====================
procedure AMA3 not implemented @ Tue Nov 14 05:40:33 CET 2017
================== Test 5 =====================
Test Interlock generation of diagnostic modules
@ Tue Nov 14 05:40:33 CET 2017 by Schicht3
master on RPS module J102025
read RPS module input J102025:REG:R:7
generate pulse on module XMA1118
read RPS module input J102025:REG:R:7
Could not connect to RPS module J102025:REG:R:7
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1119
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1116
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1115
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J102007
read RPS module input J102007:REG:R:4
generate pulse on module XMA1117
read RPS module input J102007:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J112009
read RPS module input J112009:REG:R:6
generate pulse on module XME1310
read RPS module input J112009:REG:R:6
Pulse gave the expected value of 0xD0DD
master on RPS module J112023
read RPS module input J112023:REG:R:4
generate pulse on module XME1311
read RPS module input J112023:REG:R:4
Pulse gave the expected value of 0xDDDD
master on RPS module J112023
read RPS module input J112023:REG:R:5
generate pulse on module XME1410
read RPS module input J112023:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J112023
read RPS module input J112023:REG:R:5
generate pulse on module XME1411
read RPS module input J112023:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J101030
read RPS module input J101030:REG:R:5
generate pulse on module XMA0310
read RPS module input J101030:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J101030
read RPS module input J101030:REG:R:5
generate pulse on module XMA0311
read RPS module input J101030:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J101046
read RPS module input J101046:REG:R:7
generate pulse on module XMA0410
read RPS module input J101046:REG:R:7
Pulse gave the expected value of 0x10D0
master on RPS module J124081
read RPS module input J124081:REG:R:5
generate pulse on module XMD0710
read RPS module input J124081:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J124081
read RPS module input J124081:REG:R:5
generate pulse on module XMD0711
read RPS module input J124081:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J124092
read RPS module input J124092:REG:R:4
generate pulse on module XMD0717
read RPS module input J124092:REG:R:4
Pulse gave the expected value of 0x0DDD
master on RPS module J110060
read RPS module input J110060:REG:R:5
generate pulse on module XMC0610
read RPS module input J110060:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J117065
read RPS module input J117065:REG:R:5
generate pulse on module XMC2010
read RPS module input J117065:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J117065
read RPS module input J117065:REG:R:5
generate pulse on module XMC2011
read RPS module input J117065:REG:R:5
Pulse gave the expected value of 0xDDDD
master on RPS module J108053
read RPS module input J108053:REG:R:5
generate pulse on module XMB0510
read RPS module input J108053:REG:R:5
Pulse gave the expected value of 0xDDDD
Test 5 has not been successfull, Repeat, Fix or inform ZPT
| 