Skip to Content.
Sympa Menu

opal - Re: [Opal] No beam loss in cyclotron by MAXZ AND MINZ

opal AT lists.psi.ch

Subject: The OPAL Discussion Forum

List archive

Re: [Opal] No beam loss in cyclotron by MAXZ AND MINZ


Chronological Thread 
  • From: "Calvo Portela, Pedro" <Pedro.Calvo AT ciemat.es>
  • To: "Adelmann Andreas (PSI)" <andreas.adelmann AT psi.ch>, "duheng AT impcas.ac.cn" <duheng AT impcas.ac.cn>
  • Cc: opal <opal AT lists.psi.ch>
  • Subject: Re: [Opal] No beam loss in cyclotron by MAXZ AND MINZ
  • Date: Tue, 21 Apr 2020 09:43:31 +0000
  • Accept-language: es-ES, en-US

Hi Du

You could check in the output file if some losses by MAXZ and MINZ are produced with info level >=4 when you run opal. Furthermore, I suggest you to include the option ASCIIDUMP=TRUE in the inputfile to save the lossess in a ascii file.

Best regards

Pedro Calvo Portela
Unidad de Aceleradores - CIEMAT
Avenida Complutense 40, Edificio 7
28040 Madrid
Tel: +34 – 91 496 2554

De: opal-request AT lists.psi.ch [opal-request AT lists.psi.ch] en nombre de Adelmann Andreas (PSI) [andreas.adelmann AT psi.ch]
Enviado: martes, 21 de abril de 2020 11:18
Para: duheng AT impcas.ac.cn
CC: opal
Asunto: Re: [Opal] No beam loss in cyclotron by MAXZ AND MINZ

Can you send the input files? 

Cheers A
------
Dr. sc. math. Andreas (Andy) Adelmann
Head a.i. Labor for Scientific Computing and Modelling 
Paul Scherrer Institut OHSA/ CH-5232 Villigen PSI
Phone Office: xx41 56 310 42 33 Fax: xx41 56 310 31 91
Zoom ID: 470-582-4086
-------------------------------------------------------
Friday: ETH HPK G 28   +41 44 633 3076
============================================
The more exotic, the more abstract the knowledge, 
the more profound will be its consequences.
Leon Lederman 
============================================

On 8 Apr 2020, at 09:46, duheng AT impcas.ac.cn wrote:

MINZ=-25.0,MAXZ=25.0,MINR=640,MAXR=5000,
Tracking results as the following figure. I guess Sigma_y is beam size in Z direction. When Sigma_y>25mm, there must be some loss I think, but the beam loss does not appear.
<Catch537C.jpg>
<Catch2E7F.jpg>
<Catch3C7A.jpg>
<Catch.jpg>



加速器总体室  杜衡
中国科学院-近代物理研究所
联系电话:185 0931 6679, 0931-4969134
电子邮件:duheng AT impcas.ac.cn
地址:近物所6号楼207室.

Du Heng
Accelerator department
Institute of Modern Physics, Chinese Academy of Sciences,
509 NanChang Road, LanZhou 730000, China
Tel: 185-0931-6679,+86 0931 4969134
 
Date: 2020-04-08 14:11
CC: opal
Subject: Re: [Opal] No beam loss in cyclotron by MAXZ AND MINZ
Hello Du just to understand correctly:

At the start of the tracking you can loose
particles according to MINZ and MAXZ. 

During tracking no particles are lost.

Cheers A
------
Dr. sc. math. Andreas (Andy) Adelmann
Head a.i. Labor for Scientific Computing and Modelling 
Paul Scherrer Institut OHSA/ CH-5232 Villigen PSI
Phone Office: xx41 56 310 42 33 Fax: xx41 56 310 31 91
Zoom ID: 470-582-4086
-------------------------------------------------------
Friday: ETH HPK G 28   +41 44 633 3076
============================================
The more exotic, the more abstract the knowledge, 
the more profound will be its consequences.
Leon Lederman 
============================================

On 8 Apr 2020, at 03:03, duheng AT impcas.ac.cn wrote:

Dear  OPAL developer,
    I am a researcher at the Institute of Modern Physics, Chinese Academy of sciences. 
I'm learning OPAL2.2.1 for cyclotron simulation these days, and this code is very helpful for my work.
    When I use the example about RingCyclotron in regression-tests-master for beam tracking, 
I found that there is no beam loss for minish the range between MAXZ AND MINZ  in CYCLOTRON.
When the particles are generated at the start point, MAXZ AND MINZ  in CYCLOTRON can make beam loss, 
and after that, particles won't loss whatever MAXZ AND MINZ is.
   Best wishes!


加速器总体室  杜衡
中国科学院-近代物理研究所
联系电话:185 0931 6679, 0931-4969134
电子邮件:duheng AT impcas.ac.cn
地址:近物所6号楼207室.

Du Heng
Accelerator department
Institute of Modern Physics, Chinese Academy of Sciences,
509 NanChang Road, LanZhou 730000, China
Tel: 185-0931-6679,+86 0931 4969134




Archive powered by MHonArc 2.6.19.

Top of Page