The OPAL Discussion Forum

["Adelmann Andreas (PSI)" <andreas.adelmann AT psi.ch>]

Hi Kengo, the Tosca field map is described in 1.4.5. "3D field-map” of the manual (https://gitlab.psi.ch/OPAL/src/wikis/Manual/opalcycl).

Tosca field maps are supported within SBEND3D. 

Cheers Andreas 

------
Dr. sc. math. Andreas (Andy) Adelmann
Staff Scientist - Deputy Labor Head LSM

Paul Scherrer Institut OHSA/D17 CH-5232 Villigen PSI
Phone Office: xx41 56 310 42 33 Fax: xx41 56 310 31 91
Phone Home: xx41 62 891 91 44
-------------------------------------------------------
Friday: ETH CAB F37 or HPK G 28   +41 44 632 75 22
============================================
The more exotic, the more abstract the knowledge, 
the more profound will be its consequences.
Leon Lederman 
============================================

On 20 Mar 2018, at 14:20, ksugahar AT kindai.ac.jp wrote:

Dear Jochem,

Thank you, TOSCA b-map is an ascii format text file (section 5.4.5).
p. 39.
As far as I know, FFAG@KURRI is designed based on TOSCA b-map.

Kengo



2018-03-20 21:45 GMT+09:00 Jochem Snuverink <jochem.snuverink AT psi.ch>:

Dear Kengo,

For the cyclotron field the field map is treated a bit different in OPAL,
see section 5.4 and 8.11 of the manual for details. There are several
formats. The example "bfield.dat" has the "PSI format" (section 5.4.4).

I am not so familiar with TOSCA.
Andreas do you know which cyclotron field map type corresponds to TOSCA?

best, Jochem


On 20/03/18 13:30, ksugahar AT kindai.ac.jp wrote:

Dear Jochem,

I thought the B-field map is like a TOSCA format as stated in
"opal_user_guide.pdf"
In the cyclotron example, bfield.dat is something different.
In my understanding,  this cyclotron example is sector AVF cyclotron.
Is the b-map obtained by TOSCA?

kengo



2018-03-20 18:15 GMT+09:00 Jochem Snuverink <jochem.snuverink AT psi.ch>:

Glad to hear it works for you now. Thanks for the feedback, I have updated
the wiki.

Jochem


On 20/03/18 09:54, ksugahar AT kindai.ac.jp wrote:

Thank you , Jochem.
Now all the things are fixed.
I could obtain both results in pdf.

Kengo.
■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■

　┏━━━┓　近畿大学 理工学部 電気電子工学科
　┃＼＿／┃　講師 菅原賢悟
　┗━━━┛　〒577-85022 大阪府東大阪市小若江3-4-1
                         31号棟 2F 電磁気応用研究室
　　　　　　　 TEL　06-4307-3496,  内線(4025)
　　　　　　　  E-MAIL　ksugahar AT kindai.ac.jp
　　　　　　　 URL　http://ksugahar.weebly.com/

■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■


2018-03-20 16:58 GMT+09:00 Jochem Snuverink <jochem.snuverink AT psi.ch>:

Dear Kengo,

Many thanks for the feedback. I don't know about '/etc/libibverbs.d', but
I
guess it is not important.

You should have obtained a "result.dat" after running cyclotron1.bash. I
think I know what the problem is, could you try with the attached file
perhaps?

If it still doesn't work, what is your output of cyclotron1.bash?

Best regards,
Jochem


On 20/03/18 03:29, ksugahar AT kindai.ac.jp wrote:

I found that '/etc/libibverbs.d' is somehow related to the network
drivers.
Without fixing this  issue, I could run the cyclotron example.
Thank you again. Cyncrotorn1.gpl reffers to the file
"result.dat",however,
I did not obtain "result.dat" after running cyclotron1.bash.
Cyncrotron2.in was ok.

Kengo
■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■

　┏━━━┓　近畿大学 理工学部 電気電子工学科
　┃＼＿／┃　講師 菅原賢悟
　┗━━━┛　〒577-85022 大阪府東大阪市小若江3-4-1
                          31号棟 2F 電磁気応用研究室
　　　　　　　 TEL　06-4307-3496,  内線(4025)
　　　　　　　  E-MAIL　ksugahar AT kindai.ac.jp
　　　　　　　 URL　http://ksugahar.weebly.com/

■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■


2018-03-20 10:43 GMT+09:00 ksugahar AT kindai.ac.jp
<ksugahar AT kindai.ac.jp>:

Dear Jochem,
Thank you for fixing.

All the errors are fixed but still I have one warning.

libibverbs: Warning: couldn't open config directory
'/etc/libibverbs.d'.

I am now trying to fix this.

Kengo


2018-03-19 23:30 GMT+09:00 Adelmann Andreas (PSI)
<andreas.adelmann AT psi.ch>:

Dear Kengo please try again Jochem (jochem.snuverink AT psi.ch) fixed
issue
Thanks for pointing out this issue.
Cheers Andreas
------
Dr. sc. math. Andreas (Andy) Adelmann
Staff Scientist - Deputy Labor Head LSM
Paul Scherrer Institut OHSA/D17  CH-5232 Villigen PSI
Phone Office: xx41 56 310 42 33 Fax: xx41 56 310 31 91
Phone Home: xx41 62 891 91 44
-------------------------------------------------------
Friday: ETH HPK G 28   +41 44 632 75 22
============================================
The more exotic, the more abstract the knowledge,
the more profound will be its consequences.
Leon Lederman
============================================





On 18 Mar 2018, at 11:21, ksugahar AT kindai.ac.jp wrote:

Thank you again, but

I have downloaded OPAL binary 1.6.1-3
end extracted in the ${HOME}.

I have added the following lines in ~/.bashrc

export LD_LIBRARY_PATH="${HOME}/OPAL-1.6.1-3/lib:$LD_LIBRARY_PATH"
export PATH=${HOMe}/OPAL-1.6.1-3/bin:$PATH
export OPAL_EXE_PATH=${HOME}/OPAL-1.6.1-3/bin
source ${HOME}/OPAL-1.6.1-3/etc/profile.d/opal.sh

I have downloaded Cyclotron example from
https://gitlab.psi.ch/OPAL/src/wikis/Cyclotron.

When I do
./cyclotron1.bash

I see the following error.

j = Running turn 228 / 228
libibverbs: Warning: couldn't open config directory
'/etc/libibverbs.d'.
Error> *** in line 16 of file "cyclotron1.in" before token "=":
Error>
Error> *** Parse error detected by function "Object::parse()"
Error>     Object "" has no attribute "PSDUMPLOCALFRAME".

Kengo


2018-03-17 6:06 GMT+09:00 Adelmann Andreas (PSI)
<andreas.adelmann AT psi.ch>:

Great !

A

------
Dr. sc. math. Andreas (Andy) Adelmann
Staff Scientist - Deputy Labor Head LSM
Paul Scherrer Institut OHSA/D17  CH-5232 Villigen PSI
Phone Office: xx41 56 310 42 33 Fax: xx41 56 310 31 91
Phone Home: xx41 62 891 91 44
-------------------------------------------------------
Friday: ETH HPK G 28   +41 44 632 75 22
============================================
The more exotic, the more abstract the knowledge,
the more profound will be its consequences.
Leon Lederman
============================================





On 16 Mar 2018, at 16:52, ksugahar AT kindai.ac.jp wrote:

Thank you.

source $PREFIX/OPAL-1.6.1/etc/profile.d/opal.sh

sets all the environment variables.




2018-03-16 21:11 GMT+09:00 Adelmann Andreas (PSI)
<andreas.adelmann AT psi.ch>:

Yes you have to set environment variables please check:
https://gitlab.psi.ch/OPAL/src/wikis/ReleaseNotes/OPAL%201.6.0

------
Dr. sc. math. Andreas (Andy) Adelmann
Staff Scientist - Deputy Labor Head LSM
Paul Scherrer Institut OHSA/D17  CH-5232 Villigen PSI
Phone Office: xx41 56 310 42 33 Fax: xx41 56 310 31 91
Phone Home: xx41 62 891 91 44
-------------------------------------------------------
Friday: ETH HPK G 28   +41 44 632 75 22
============================================
The more exotic, the more abstract the knowledge,
the more profound will be its consequences.
Leon Lederman
============================================





On 16 Mar 2018, at 13:08, ksugahar AT kindai.ac.jp wrote:

I also tried this one but unfortunately did not work on CentOS 6.9.
Do I need to set any  environment variables to get working?

I am now following the instructions on


https://gitlab.psi.ch/OPAL/src/wikis/For%20Developers/Compile%20OPAL%20on%20RHEL6

Kengo.
■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■

　 ┏━━━┓　近畿大学 理工学部 電気電子工学科
　 ┃＼＿／┃　講師 菅原賢悟
　 ┗━━━┛　〒577-85022 大阪府東大阪市小若江3-4-1
                       31号棟 2F 電磁気応用研究室
　　　　　　　  TEL　06-4307-3496,  内線(4025)
　　　　　　　 E-MAIL　ksugahar AT kindai.ac.jp
　　　　　　　  URL　http://ksugahar.weebly.com/

■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■


2018-03-16 21:05 GMT+09:00 Adelmann Andreas (PSI)
<andreas.adelmann AT psi.ch>:

1.6.1 is the latest release and there are binaries available from the



http://amas.web.psi.ch/Downloads/OPAL/package/OPAL-1.6.1-3-x86_64-linux.tar.xz

A
------
Dr. sc. math. Andreas (Andy) Adelmann
Staff Scientist - Deputy Labor Head LSM
Paul Scherrer Institut OHSA/D17  CH-5232 Villigen PSI
Phone Office: xx41 56 310 42 33 Fax: xx41 56 310 31 91
Phone Home: xx41 62 891 91 44
-------------------------------------------------------
Friday: ETH HPK G 28   +41 44 632 75 22
============================================
The more exotic, the more abstract the knowledge,
the more profound will be its consequences.
Leon Lederman
============================================





On 16 Mar 2018, at 13:02, ksugahar AT kindai.ac.jp wrote:

Thank you again,

I am trying to compile OPAL 1.6.3 (not succeeded yet).

Is it the latest version or I have to compile another one?

Kengo
■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■

　 ┏━━━┓　近畿大学 理工学部 電気電子工学科
　 ┃＼＿／┃　講師 菅原賢悟
　 ┗━━━┛　〒577-85022 大阪府東大阪市小若江3-4-1
                      31号棟 2F 電磁気応用研究室
　　　　　　　  TEL　06-4307-3496,  内線(4025)
　　　　　　　 E-MAIL　ksugahar AT kindai.ac.jp
　　　　　　　  URL　http://ksugahar.weebly.com/

■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■


2018-03-16 21:00 GMT+09:00 Chris Rogers <chris.rogers AT stfc.ac.uk>:

Okay, I will send you a lattice file - it will take me a couple of
days
to
get it working with the latest version of OPAL (a few things have
changed
since I did that simulation).

Regards,
Chris



On 16/03/18 11:57, ksugahar AT kindai.ac.jp wrote:


Great.  You could reproduce a plot like the one we did for IPAC 2015
Fig.
1



That is true.

This uses an OPERA field map for the FFAG triplet. If you would like
to
vary
the triplet (e.g. change FD ratio), you will need to regenerate the
field
map.



I have already a field map from Ishi-san @ KURRI and want to reproduce
the result and try to fix the field so that it would be scaling.

Regards,
Kengo

2018-03-16 20:46 GMT+09:00 Chris Rogers <chris.rogers AT stfc.ac.uk>:


Great.  You could reproduce a plot like the one we did for IPAC 2015
Fig.
1

accelconf.web.cern.ch/AccelConf/IPAC2015/papers/mopje077.pdf

This uses an OPERA field map for the FFAG triplet. If you would like
to
vary
the triplet (e.g. change FD ratio), you will need to regenerate the
field
map.

I can help you to put in an ideal scaling FFAG magnet instead - but
this
would be perfectly scaling, so the tune variation with momentum will
not
be
present. What would you prefer?

Cheers,
Chris




On 16/03/18 04:14, ksugahar AT kindai.ac.jp wrote:



I will be happy if kindly send me example lattice files for KURRI
FFAG.
I am now trying to compile OPAL on CentOS 6.9 but have trouble with
compiling boost.
I want the tune diagram of KURRI FFAG and try to find out what happens
when B map changes.

Best wish,
Kengo
■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■

　 ┏━━━┓　近畿大学 理工学部 電気電子工学科
　 ┃＼＿／┃　講師 菅原賢悟
　 ┗━━━┛　〒577-85022 大阪府東大阪市小若江3-4-1
                        31号棟 2F 電磁気応用研究室
　　　　　　　  TEL　06-4307-3496,  内線(4025)
　　　　　　　   E-MAIL　ksugahar AT kindai.ac.jp
　　　　　　　  URL　http://ksugahar.weebly.com/

■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■／■


2018-03-13 19:09 GMT+09:00 Chris Rogers <chris.rogers AT stfc.ac.uk>:



Hi Kengols,
I might be able to help - I have some example lattices for the KURRI
FFAG
and also a doublet lattice proposed by Shinji Machida.

What were you hoping to model?

Regards,
Chris Rogers


On 01/03/18 12:01, ksugahar AT kindai.ac.jp wrote:




Does anybody know how to fix the missing link
of the following URL https://gitlab.psi.ch/OPAL/src/wikis/home?
I am looking for an examle with FFAG.

Thanks,
Kengols



--
ISIS Intense Beams Group

tel: +44 (0)1235 44 6983

Building R2,
Rutherford Appleton Laboratory,
Harwell Science and Innovation Campus,
Didcot.
OX11 0QX





--
ISIS Intense Beams Group

tel: +44 (0)1235 44 6983

Building R2,
Rutherford Appleton Laboratory,
Harwell Science and Innovation Campus,
Didcot.
OX11 0QX




--
ISIS Intense Beams Group

tel: +44 (0)1235 44 6983

Building R2,
Rutherford Appleton Laboratory,
Harwell Science and Innovation Campus,
Didcot.
OX11 0QX